The TCE 1.5 is a “thin center eliminator” – What is a “center eliminator”? It is a system that provides discreet, three-channel performance out of only two speaker cabinets. The upper portions of both speakers handle the dedicated left and right content, but the lower portions of each TCE act as mono center channels which are then fed the same center mix from your source. This creates the illusion that there is a center channel speaker right in the middle of your left and right speakers.
The TCE solves a common installation problem where, for one reason or another, a dedicated center channel speaker cannot be installed or mounted. The TCE can be wall-mounted or used with the smoked acrylic table-top stand included in the box.
For optimal sound, pair the TCE with the P3-35 3-Channel amplifier.
|Specifications: TCE1.5||Mounting hardware included|
|Nominal Impedance||8 ohms|
|Sensitivity dB @ 2.83V/1M||90 dB|
|Frequency Response (1)||65 Hz – 20 kHz|
|Recommended Power||15 - 100 Watts|
|Transducer - Low Frequency Driver||3″ Ultra-Long Throw Polypropylene w/ NBR Surround|
|Transducer - High Frequency Driver||LR: .75" Silk/Synthetic Soft Dome Center: .75" Silk/Synthetic Soft Dome|
|Crossover Frequency||3.5 kHz|
|Crossover Type||2-Way Absolute Phase®|
|Additional Drivers||Bass Radiators: (2) 3" Ultra-Long Throw Polypropylene w/ NBR Surround|
|Colors||Black Extruded Aluminum|
|Enclosure alignment||Sealed w/Passive Radiator|
|Grille - material||Black Powder-Coated Pressure-Fit Aluminum|
|Height (SM = Height)||171.4 mm / 6.75"|
|Diameter (SM = Width)||673.1 mm / 26.5"|
|Depth||38.1 mm / 1.5"|
|Weight||3.8 kg / 8.35 lb|
|Shipping Weight||5.0 kg / 11 lb|
|Regulatory - CE||approved|
|Regulatory - RoHS||approved|