HP1290i-WH

HP1290i-WH
Find a Reseller
In stock

SoundTube 12" 2-way Hanging Speaker in White



SoundTube HP1290i Hanging Speaker in White

Patented BroadBeam Ring waveguide technology delivers a consistent dispersion pattern for maximum coverage area per speaker. One 12 inch treated fiber cone with a cloth surround concentrically mounted to a 1.375 inch mylar compression driver with waveguide. High-SPL, high-efficiency system for the sound reinforcement and PA markets. An impressive 2 cubic foot, ported ZeroReflection enclosure for added bass response, rigidity and optimal sound reproduction. Easy-access five-position tap switch with 25-, 70.7-, 100-volt and transformer bypass position. High efficiency for reduced amplification costs and max output for distributed or 8 ohm systems. Low insertion loss 150-watt transformer. UL 1480 (UEAY) and 2239 (hanging hardware) approved. Included accessories: impact-resistant steel grille, hanging hardware, Euroblock connector, terminal weather boot.

Owner's Manual |  Tech Sheet |  Mechanical Drawing |  A&E Specs |  GLL |  EASE 4.0 |  CLF 1 |  CLF 2 |  Revit |  DXF |  DWG |  Tap Switch Instructions |  PDF Drawing

About SoundTube
More Information
ColorWhite
UPC752830441989
ManufacturerSoundTube
Manufacturer's CategoryHPi High Ceiling Pendant
Height22.8 in / 579.1 mm
Width/Diameter20.8 in / 528.3 mm
Shipping Weight52.7 lbs / 23.9 kg
Carton Height26.75 in / 679.45 mm
Carton Length24 in / 609.6 mm
Carton Width24 in / 609.6 mm
CertificationsCE, RoHS, UL1480A, UL2239
Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Ported
Enclosure Volume3500 cu in / 57354.72 cu cm
Included AccessoriesEuroblock, Hanging Hardware, Safety Cable, Terminal Weather Boot
Optional AccessoriesWhite Grille (GRL-HP1290-WH)|White Surface Mount Bracket (AC-HP-SM1290-WH)|Beam Clamp (AC-BC-1)|Forged Eyebolt (AC-FE1)|White Split Loom Tubing (AC-SLT-10-WH)|10' Hanging Kit (AC-HP-HD10)|20' Hanging Kit (AC-HP-HD20)|50' Hanging Kit (AC-HP-HD50)|Large Weather Resistant White Terminal Boot (WEATHERBOOT-L-WH)|Snap Link (AC-SL1)|Connector (EUROBLOCK)
Source Inputs4 Pin 5.08mm Euroblock
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Coverage Angle (±6dB @ 2kHz) 85°
Crossover Frequency2.2 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)6.2 and 16.2
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)6.7dB and 12.1dB
Frequency Response (± 10 dB)59 Hz - 22 kHz
Frequency Response (± 3 dB)77 Hz - 19 kHz
Grille PropertiesPowder-Coated, Steel
Low Frequency Voice Coil2 in / 50.8 mm
Low Pass Crossover24dB per octave 4th order
Max. Continuous Power RMS150W
Max. Program Power300 W
Minimum Impedance (Ω Ohms)6.6 Ω
Network Type: High Pass24dB per octave 4th order
Nominal Impedance (Ω Ohms)8 Ω
Tweeter Driver1.375" Mylar Compression Driver w/ Waveguide
Woofer Driver12" Treated Fiber Cone w/ Treated Cloth Surround
Sensitivity dB @ 1W/1M96 dB
Sensitivity dB @ 2.83V/1M96 dB
Tap SelectorRotary Switch
Transformer Taps Max. Setting (25V/70.7V/100V)19W/150W/150W
Copyright © MS Electronics. All rights reserved.