LA808i-BK

LA808i-BK
Find a Reseller
Out of stock
SoundTube 3-way Line Array Speaker in Black (used only in conjuction with the LA880i 3-way line array) This product is discontinued.

SoundTube LA808I Line Array Speaker in Black

NOT a subwoofer, the SoundTube LA808i is designed to increase the directivity of low frequencies in SoundTube®'s Line Array system. It can be used only in conjuction with the LA880i 3-way line array. The use of the LA808i is recommended in spaces that have a large reverberation time. When a single unit is added to the LA880i, directivity of low frequencies is increased by up to an octave lower than with the LA880i alone. The product's dimensions are identical to those of the LA880i. The LA808i must be placed either directly above or directly below the LA880i in order for the system to work properly. If desired, two LA808i units can be added: one above the LA880i and one below. Coverage Angle: (-6 dB @ 2 kHz) 103 horizontal, 29 vertical | (-6 dB @ 10 kHz) 77 horizontal, 51 vertical | (Avg. 2 to 10 kHz) 90 horizontal, 60 vertical (200-10k)

Owner's Manual | Tech Sheet | Mechanical Drawing | DXF | DWG | PDF Drawing | GLL | CLF (CF1) | CLF (CF2) | A&E Specs

About SoundTube
More Information
ColorBlack
UPC644216198801
ManufacturerSoundTube
Manufacturer's CategoryLA Line Array
Height81.8 in / 2077.72 mm
Width/Diameter8.24 in / 209.3 mm
Shipping Weight50.45 lbs / 22.88 kg
Carton Height12 in / 304.8 mm
Carton Length44 in / 1117.6 mm
Carton Width16 in / 406.4 mm
CertificationsCE, RoHS
Enclosure PropertiesMDF, Painted, Plywood
Included AccessoriesBack Cover, Euroblock, Jumper Cable, LINK Side Plates, Mounting Hardware, Safety Cable
Optional AccessoriesBlack Back Plate (AC-LA8-BACK-BK)|Black Side Connector Plates (AC-LA8-LINK-BK)|Black Top Mounted Fly Point Plates (AC-LA8-FLY-BK)|Pan and Tilt Surface Mount Bracket Kit (MM-024-BT or MM-022-BT)|Pole Mount Adapter (AC-PA-010)|Heavy Duty Pan and Tilt Surface Mount Bracket Kit (MM-120HD)|Fly Bracket (SAS-1WA-20)
Source Inputs4 Pin 5.08mm Euroblock, SpeakON
Coverage Angle (±6dB @ 2kHz) 103° Horizontal 29° Vertical
Crossover Frequency500 Hz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)9.1
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)12.6dB
Frequency Response (± 10 dB)75 Hz - 22 kHz
Frequency Response (± 3 dB)83 Hz - 22 kHz
Grille PropertiesPowder-Coated, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover12 dB per octave
Max. Continuous Power RMS300 W
Max. Program Power500 W
Mounting Depth10.8 in / 274.3 mm
Network Type: High Pass12 dB per octave
Nominal Impedance (Ω Ohms)4 Ω
Woofer Driver(8) 4.5" Woofers Paper w/ Rubber Surround
Sensitivity dB @ 1W/1M87 dB
Sensitivity dB @ 2.83V/1M90 dB
Copyright © MS Electronics. All rights reserved.